01Before you design

3D Laser Scanning & Point Cloud Surveys

A laser scanner records millions of measured points in minutes. You get a complete 3D record of a building or site, ready for your architect to draw from, with nothing missed and fewer return visits.

When you need it

Is this the survey you need?

  • Renovating or extending an existing house and you need accurate existing floor plans
  • Your architect needs facades, roof lines and window positions of a building or its neighbours
  • A heritage or complex building is too detailed to measure by hand
  • You want an as-built record of a structure before it is covered up
  • Checking walls, slabs or steel against the design during construction

What's included

What we survey and show

  • Site visit planned around access to every room and elevation
  • Scans from multiple set-ups, joined into one point cloud
  • Control tied to MGA2020 coordinates and AHD levels
  • Interior floor plans with wall, door and window positions
  • External elevations, roof ridge and gutter levels
  • Sections through the building where needed
  • Combined with a detail survey of the land when required
  • Point cloud supplied in common formats for your designer

Good to know

Why scan instead of measuring by hand

A tape or a total station picks up the points the surveyor chooses. A scanner records everything in its view, so a dimension your architect needs later is usually already in the data. That saves return visits, and it is especially useful for older homes where walls are rarely square, ceilings vary and the existing drawings, if any, do not match what was built.

What you actually receive

A raw point cloud is large and not every designer works with it directly. We register the scans into one cloud tied to survey control, then draft the floor plans, elevations or sections you ask for as DWG files. You can also have the cloud itself, so your architect or engineer can take further measurements without another site visit.

How it works

From quote to signed plan

  1. CH 0.00

    Scope

    Tell us the building, rooms and outputs you need, and we quote a fixed fee.

  2. CH 25.00

    Scan

    We scan inside and out, with survey control so everything is on the right datum.

  3. CH 50.00

    Process

    Scans are joined, checked and drafted into the plans you asked for.

  4. CH 75.00

    Deliver

    You receive DWG drawings, a signed PDF and the point cloud if you want it.

What you get

Delivered to you

  • Registered point cloud
  • Floor plans & elevations (DWG)
  • Sections on request
  • Tied to MGA & AHD

Checked and signed by Taha Abdo, Registered Surveyor SU010105.

Who it's for

We send the files to you, or straight to your architect, builder, engineer or certifier.

  • Architects & designers
  • Builders
  • Developers
  • Homeowners

Questions

Common questions

Do I need laser scanning or a normal detail survey?

For vacant land, or a site where only the ground, boundaries and outlines of buildings matter, a detail survey is usually enough and costs less. Scanning is worth it when the existing building itself is being designed around: renovations, additions, facades, heritage work and tight sites next to neighbours.

Can scanning be combined with a detail survey?

Yes. We often scan the house and survey the land in the same visit, then deliver one drawing set on the same coordinates and levels, so the building and the site line up exactly.

What file formats do I get?

Drawings come as DWG and a signed PDF. The point cloud can be supplied in common formats such as E57 or LAS. Tell us what your architect or engineer works with and we will match it.

Get a quote

Send us the address.

We come back with a fixed fee that lists exactly what is included. Not sure which survey you need? Tell us what you are building.